tests-bg.jpg

EPA VGP EAL Compliant Fluids

EPA VGP EAL Compliant Fluids

U.S. Environmental Protection Agency (EPA) Key Facts New Vessel General Permit (VGP) guidelines

  • December 19 2013, new Vessel General Permit (VGP) requirements defined by the U.S. Environmental Protection Agency (EPA) went into effect.
  • The new VGP requirements impacts all commercial vessels longer than 79 feet and impose strict limits on incidental discharges (including lubricants) for vessels operating within three nautical miles of U.S. coastlines and in the Great Lakes.
  • Seals and equipment need to be maintained to regulation standards, with fines for non-compliance.
  • Affected marine applications include; stern tubes, controllable pitch propellers, stabilisers, rudders, thrusters, azipods, wire ropes and towing notch interfaces.
  • It is recommended that deck equipment uses EAL oils if there is a risk of leakage running overboard.
  • The U.S. Environmental Protection Agency (EPA) provides more detail on the requirements and recommended resources for additional information.
  • For additional information contact Bill Garmier, Renewable Lubricants, Inc. wwgarmier(at)renewablelube.com or call RLI 1-800-837-5823

VGP Vessel General Permit Compliance Declaration for RLI Products

Bio-Ultimax™ 1000 Hydraulic Fluids

Bio-Ultimax™ 1000 Hydraulic Fluids are ultimately biodegradable biosynthetic formulas that directly replace mineral oil based hydraulic fluids. These patented biobased hydraulic fluids are formulated to perform in high and low pressure hydraulic systems that require Anti-Wear (AW), anti-rust, anti-oxidation, anti-foam, and demulsibility properties. (OUR MOST POPULAR, MOST PROVEN, AND BEST SELLING HYDRAULIC FLUIDS)

Technical Data Sheet
ISO 32 Safety Data Sheet
ISO 46 Safety Data Sheet
ISO 68 Safety Data Sheet
ISO 100 Safety Data Sheet

Bio-Ultimax™ 1500 Dielectric Hydraulic Fluids (ISO 22, 32, 46, 68)

A specially formulated, ultimately biodegradable product designed specifically for use in hydraulic equipment operating over a wide range of temperatures and where an oil with high dielectric (>35 KV) insulating property is required. Genie-Terex and Altec Equipment approvals. (OUR MOST VERSATILE PERFORMING HYDRAULIC FLUIDS THAT CAN BE USED IN MANY DIFFERENT APPLICATIONS) Click here to view Altec approval letter

Technical Data Sheet
ISO 22 Safety Data Sheet
ISO 32 Safety Data Sheet
ISO 46 Safety Data Sheet
ISO 68 Safety Data Sheet

Bio-Ultimax™ 2000 Hydraulic Fluids

Bio-Ultimax™ 2000 Hydraulic Fluids are ultimately biodegradable biosynthetic formulas that directly replace mineral oil based hydraulic fluids. These patented biobased hydraulic fluids are formulated to perform in high and low pressure hydraulic systems that require Anti-Wear (AW), anti-rust, anti-oxidation, anti-foam, and demulsibility properties.

Technical Data Sheet
ISO 32 Safety Data Sheet
ISO 46 Safety Data Sheet
ISO 68 Safety Data Sheet

Bio-Ultimax™ Hydraulic Fluids AW 1000 SAE 10W40

A specially formulated, ultimately biodegradable product designed for hydraulic driven systems that require a heavier SAE 40 viscosity for summer and fluid that passes the winter 10W viscosity for cold temperature pumpability protection (i.e.: approved by Hustler Mower Engineering for this OEM specifications). 

Technical Data Sheet
10W40 Safety Data Sheet

Bio-Fleet™ Hydraulic Fluid (ISO 22, 32, 46, 68)

Bio-Fleet™ Hydraulic Fluids are ultimately biodegradable vegetable based formulas that meets and exceeds Vickers M-2950-S, Vickers 1-286-5, U.S. Steel 126, and U.S. Steel 127. These patented biobased hydraulic fluids are formulated to perform in fleet, marine, and industrial hydraulic systems that require Anti-Wear (AW), anti-rust, anti-oxidation, anti-foam, and demulsibility properties. (OUR LOWEST COST AND FASTEST GROWING HYDRAULIC FLUID IN SALES)

Technical Data Sheet
ISO 22 Safety Data Sheet
ISO 32 Safety Data Sheet
ISO 46 Safety Data Sheet
ISO 68 Safety Data Sheet

Bio-Ultimax™ 1200LT Hydraulic Fluids (ISO 15, 22, 32, 46)

Bio-Ultimax™ 1200LT (Low Temperature) Hydraulic Fluids are ultimately biodegradable, biobased formulas that were designed specifically to replace mineral oil based hydraulic fluids for environmentally sensitive and/or cold temperature areas. 

Technical Data Sheet
ISO 15 Safety Data Sheet
ISO 22 Safety Data Sheet
ISO 32 Safety Data Sheet
ISO 46 Safety Data Sheet

Bio-SynXtra™ Marine Hydraulic Fluid (ISO 32, 46, 68, 100)

Bio-SynXtra™ Marine Hydraulic Fluids were designed specifically to provide exceptional international Environmentally Acceptable Lubricants (EAL) performance for world-wide marine applications in international waters. They are ultimately biodegradable, biosynthetic formulas that meet both European EU Ecolabel** and US Environmental Protection Agency (EPA) 2013 Vessel General Permit (VGP) guidelines for EALs.

Technical Data Sheet
Please use the form on the side of this page to request an SDS for this product.

Bio-SynXtra™ Powerlift Fluid (ISO 15-22)

Bio-SynXtra™ PowerLift Hydraulic Fluid is an ultimately biodegradable biobased formula designed specifically to replace mineral oil based hydraulic fluids for environmentally sensitive areas. It provides excellent performance in very cold temperatures and can replace obsolete specification MIL-PRF-5606 for ground support equipment. (Provides the higher seal swell requirements for military equipment.)

Technical Data Sheet
ISO 15-22 Safety Data Sheet

Bio-HVO™ Hydraulic Fluids (ISO 46, 68, FR)

Bio-HVO™ Hydraulic Fluids are ultimately biodegradable vegetable based formulas that meet and exceed Vickers M-2950-S, Vickers 1-286-5, U.S. Steel 126, U.S. Steel 127, and U.S. Steel 136. 

Technical Data Sheet
ISO 46 Safety Data Sheet
ISO 68 Safety Data Sheet

Bio-HVO2™ Hydraulic Fluids (ISO 32, 46, 68, FR)

Bio-HVO2™ Hydraulic Fluids are ultimately biodegradable vegetable based formulas that meet and exceed Vickers M-2950-S, Vickers 1-286-5, U.S. Steel 126, U.S. Steel 127, and U.S. Steel 136. 

Technical Data Sheet
ISO 32 Safety Data Sheet
ISO 46 Safety Data Sheet
ISO 68 Safety Data Sheet

Bio-MIL-PRF-32073 Hydraulic Fluids (ISO 15, 22, 32, 46, 68)

Bio-MIL-PRF-32073 Hydraulic Fluids are ultimately biodegradable vegetable biobased formulas that were designed specifically to replace mineral oil based hydraulic fluids for environmentally sensitive areas.They have been specifically formulated to provide additional seal swell (10% to 30%) as required by MIL-PRF-32073 and ISO 15 or ISO 22 can replace obsolete specification MIL-PRF-5606 for ground support equipment. 

Technical Data Sheet
ISO 15 Safety Data Sheet
ISO 22 Safety Data Sheet
ISO 32 Safety Data Sheet
ISO 46 Safety Data Sheet
ISO 68 Safety Data Sheet

Bio-AW/AL™ Hydraulic Press Oils (ISO 32, 46, 68)

Bio-AW/AL™ Hydraulic Press Oils are ultimately biodegradable vegetable based formulas that replace mineral oil based hydraulic fluids in demanding press hydraulic systems. 

Technical Data Sheet
Please use the form on the side of this page to request an SDS for this product.

Bio-AW Turbine™ R & O Fluids (ISO 32, 46, 68, 100)

Bio-AW Turbine™ R & O Fluids are ultimately biodegradable vegetable based formulas that were designed specifically to replace mineral oil based turbine oils in environmentally sensitive hydroelectric (water) turbine bearings. 

Technical Data Sheet
ISO 32 Safety Data Sheet
ISO 46 Safety Data Sheet
ISO 68 Safety Data Sheet
ISO 100 Safety Data Sheet

Bio-Hydraulic Hoist Oil (ISO 32)

BHHO is an ultimately biodegradable vegetable based formula that replaces mineral oil based hydraulic fluids for hydraulic hoist applications. It is an economical product that is specially designed for hydraulic hoists used for lifting transportation equipment in garages and shops.

Technical Data Sheet
Please use the form on the side of this page to request an SDS for this product.

Bio-Bottle Jack™ Oil (ISO 32)

Bio-Bottle Jack™ hydraulic Fluid is a biobased, biodegradable and environmentally non-toxic hydraulic oil for use in general purpose hydraulic systems. This patented ISO 32 viscosity grade hydraulic oil is specially designed to be a direct replacement for petroleum oil based hydraulic fluids in mobile and stationary hydraulic vane, piston and gear type pumps.

Technical Data Sheet 
ISO 32 Safety Data Sheet

Bio-SynXtra™ E.P. Gear Oils (ISO 46, 68, 100, 150, 220, 320, 460, 680, 1000)

Bio-SynXtra™ EP Gear Oils are designed to meet and exceeds the U.S. Steel 224, AGMA 9005/250.04, DIN 51517, Part 3, David Brown DB S1.53.101, and Cincinnati Machine E.P. performance requirements. Bio-SynXtra EP Gear Oils are recommended for lubricating spur, helical, bevel, and worm gear configurations which are subject to heavy loading or shock loading and are designed for heavy-duty applications. Bio-SynXtra gear oils provide enhanced thermal and oxidation stability for extended life.

Technical Data Sheet
ISO 46 Safety Data Sheet
ISO 68 Safety Data Sheet
ISO 100 Safety Data Sheet
ISO 150 Safety Data Sheet
ISO 220 Safety Data Sheet
ISO 320 Safety Data Sheet
ISO 460 Safety Data Sheet
ISO 680 Safety Data Sheet
ISO 1000 Safety Data Sheet

Bio-E.P. Gear™ Oils (ISO 46, 68, 100, 220, 320, 460)

Bio-E.P. Gear™ Oils are designed to meet and exceeds the U.S. Steel 224, AGMA 9005/250.04, DIN 51517, Part 3, David Brown DB S1.53.101, and Cincinnati Machine E.P. performance requirements. Bio-E.P. Gear oils are the perfect economical choice where leakage or contaminations are more prominent and equipment requires more frequent oil change intervals.

Technical Data Sheet
ISO 46 Safety Data Sheet
ISO 68 Safety Data Sheet
ISO 100 Safety Data Sheet
ISO 220 Safety Data Sheet
ISO 320 Safety Data Sheet
ISO 460 Safety Data Sheet

Bio-SynXtra™ Hydra-Gear Fluids

Bio-SynXtra™ Hydra-Gear Fluids are specially designed, biobased synthetic formulas that replace conventional mineral oil based lubricants for bearing, hydraulic, and gear applications not requiring high levels of extreme pressure (EP).

Technical Data Sheet
ISO 220 Safety Data Sheet

Bio-SynXtra™ Stern Tube Lubes

Bio-SynXtra™ Stern Tube Lubes are specially designed, biobased synthetic formulas that replace conventional mineral oil based lubricants for lubricating bearing sets in ship stern tubes and certain designed retractable fin stabilizers and controllable pitch propeller systems. They are ultimate biodegradable and specifically designed to provide the proper emulsification of seawater for improved lubrication in wet conditions.

Technical Data Sheet
ISO 68 Safety Data Sheet
ISO 100 Safety Data Sheet
ISO 150 Safety Data Sheet
ISO 220 Safety Data Sheet

Bio-Air Tool™ Lubricants (ISO 22, 32)

Bio-Air Tool™ Lubricants are specially formulated, ultimately biodegradable air tool lubricants designed to replace petroleum based air tool oils. 

Technical Data Sheet
ISO 22 Safety Data Sheet
ISO 32 Safety Data Sheet

Bio-Drip™ Oils (SAE 10W20, SAE 10W30)

Bio-Drip™ Oils are fully formulated ultimately biodegradable vegetable based high performance turbine oils.  Bio-Drip™ Oils are recommended for use in drip lubrication systems for water well line shaft bearings, irrigation systems, etc. 

Technical Data Sheet
SAE 10W20 Safety Data Sheet
SAE 10W30 Safety Data Sheet

Bio-Rock Drill™ Oils (10W20, 10W30, 15W50, 20W60)

Renewable Lubricants' Bio-Rock Drill™ Oils are ultimately biodegradable vegetable oils formulated with Antiwear/EP, rust and oxidation inhibitors for the protection of pneumatic equipment.

Technical Data Sheet
SAE 10W20 Safety Data Sheet
SAE 10W30 Safety Data Sheet
SAE 15W50 Safety Data Sheet
SAE 20W60 Safety Data Sheet

Bio-E.P.™ Wire Rope Lubricant

RLI’s Bio-E.P.™ Wire Rope Lubricants are ultimately biodegradable vegetable oils formulated with antiwear, extreme pressure (EP), anti-rust, oxidation inhibitors, and a tackifier.

Technical Data Sheet
SAE 10W20 Safety Data Sheet
SAE 10W30 Safety Data Sheet
SAE 20W60 Safety Data Sheet

Bio-Chain & Cable Lubricants (SAE 10W20, SAE 10W30, SAE 15W50, SAE 20W60)

Renewable Lubricant’s Bio-Chain & Cable™ Lubricants are ultimately biodegradable vegetable oils formulated with Antiwear/EP, rust/corrosion and oxidation inhibitors, and a tackifier. 

Technical Data Sheet
SAE 10W20 Safety Data Sheet
SAE 10W30 Safety Data Sheet
SAE 15W50 Safety Data Sheet
SAE 20W60 Safety Data Sheet

Bio-High Temp™ 180 E.P. Grease NLGI #2 (Multipurpose Lithium Complex)

This High Temperature Biobased grease is a state-of-the-art product, which is characterized by its super high viscosity index base oil and lithium complex thicker. 

Technical Data Sheet
Safety Data Sheet

Bio-E.P. ™ Graphite Grease NLGI #1 (Railroad Curve Grease)

Bio-E.P.™ Graphite Grease is a biobased, Extreme Pressure (EP) grease specially formulated for sliding surfaces and applications where extreme pressure exceeds the fluid film. 

Technical Data Sheet
Please use the form on the side of this page to request an SDS for this product.

Bio-E.P. ™ Graphite Grease NLGI #2

Bio-E.P.™ Graphite Grease NLGI#2 is a biobased, Extreme Pressure (EP) grease specially formulated for sliding surfaces and applications where extreme pressure exceeds the fluid film.  

Technical Data Sheet
Please use the form on the side of this page to request an SDS for this product.

productdisplay.jpg

 

Request a new SDS OSHA-(29CFR1910.1200) (Formerly MSDS)